Non standard bearing seats are very prone to damage. If the damage is severe, it not only affects the appearance but also the service life. For such bearing seats, we cannot use them normally. If they are repaired in a timely manner, they can continue to be used, otherwise it will be very wasteful. But many people are not very familiar with the repair process of bearing seats, so we cannot carry out repairs.
Let's take a look together below.
The repair process is relatively simple, and can be completed in four simple steps:
We need to first solve the surface and clean it thoroughly. Generally, the surface of the bearing seat that has been used for a period of time is full of dirty substances, oil stains or moisture. We need to first remove these dirty substances, and the oil stains must also be removed thoroughly.
After solving the surface problem, we can mix and repair the materials, and of course, the proportion of blending must be suitable. After adjustment, we can evenly apply the material on the surface of the product, applying it to the areas where the bearing seat needs to be repaired, but be sure to fill it firmly so that it can be used for a longer period of time.
After coating the material, we need to cure it, and if necessary, we can heat it moderately.
The heating process will make the material solidify stronger, and of course, this repair process also takes many hours. We need to be patient.
The repair operation of this bearing seat is relatively simple and easy to learn. You can follow the method introduced above.